+86 18920794106
01
Nylon rubber Conveyor Belt /Polyamide (NN) Conveyor Belt
Product Introduction
Nylon core conveyor belts have the characteristics of thin belt body, high strength, impact resistance, good performance, high interlayer adhesive strength, excellent flexibility, and long service life. They are suitable for conveying materials under medium to long distance, high load and high-speed conditions. Nylon conveyor belts not only have these advantages, but most importantly, they are fast and convenient, greatly improving work efficiency and completeness
According to the different properties of the covering adhesive, it can be divided into cold resistant, acid resistant, alkali resistant, oil resistant, wear-resistant, etc.
According to different purposes, it can be divided into lifting belts, power belts, and conveyor belts.
According to the different structures, it can be divided into ordinary laminated type, impact resistant type with lateral reinforcement layer, and tear resistant type.
(1) Core materials: NN100, NN150, NN200, NN300, NN400, NN500
(2) Bandwidth: 100mm-3000mm
(3) Fabric layer: 1-10 layers
(4) Cover adhesive: Working surface: 1.5-8mm Non working surface: 0mm-4.5mm
(1) Core materials: NN100, NN150, NN200, NN250, NN300, NN350, NN400, NN450, NN500
(2) Bandwidth: 100mm-3000mm
(3) Fabric layer: 1-10 layers
(4) Cover adhesive: Working surface: 1.5-8.0mm Non working surface: 1.5-4.5mm
Product Features
Application
1. This product is refined from nylon canvas through processes such as rolling, forming, and vulcanization.
2. This product is suitable for different usage conditions and can be made into different structures such as edge wrapped, open edge, middle ladder, edge ladder, etc
Features:
1. Good elasticity, impact resistance, and wear resistance of the belt.
2. Good flexibility and easy to groove.
3. No mold corrosion occurs.
Technical standards:
National standard GB/T7984-2001
Nylon (NN) conveyor belt:
Cover layer: tensile strength not less than 15Mpa, tensile length at break not less than 350%, wear amount ≤ 200mm3
The average value of interlayer bonding strength in longitudinal specimens shall not be less than 4.5N/mm between layers, and not less than 3.2N/mm between covering adhesive and fabric layers
The longitudinal elongation at break of the entire thickness shall not be less than 10%, and the longitudinal reference force elongation of the entire thickness shall not exceed 4%