+86 18920794106
0102030405
High Angle Wavy Edge Rubber Conveyor Belt - China Suppliers & Factory for Reliable Material Handling
Specifications
Wave Shaped Edge Conveyor Belt (Ordinary Large Angle Wave Shaped Edge Conveyor Belt) Specifications:
Core Materials: CC-56, NN100, NN150, NN200, NN300, NN400
Bandwidth: 100mm – 2400mm
Fabric Layer: 2 – 10 layers
Cover Adhesive: Working surface: 1.5–8mm | Non-working surface: 0mm–4.5mm
Core Material of Edge Conveyor Belt
| Category | Details / Grades |
|---|---|
| Cotton Canvas Core | CC-56 |
| Nylon Fabric Core | NN100, NN150, NN200, NN300, NN400, NN500 |
| Polyester Fabric Core | EP100, EP150, EP200, EP300, EP400, EP500 |
| Wire Rope Core | ST1000 – ST5400 |
| Edge Height (mm) | S80, S100, S120, S160, S200, S240, S300, S400, S500 |
| Partition Height (mm) | TC75, TC90, TC110, TC140, TC180, TC220, TC280, TC380, TC480 |
| General Writing Style | e.g. B800 × 6 (3+3+1.5) × 110 meters |
| Example Code | S120-120 TC110-252-460 |
Product Features
- 1 Increased the conveying angle (30–90 degrees)
- 2 Small footprint and low investment
- 3 Large conveying capacity and higher lifting height
- 4 Smooth transition from horizontal to inclined (or vertical)
- 5 Suitable for conveying powdery, granular, small, pasty, and liquid materials that are prone to scattering
- 6 Low energy consumption, simple structure, high tape strength, and long service life
Product Description
The load-bearing capacity of the edge conveyor belt is improved, and the lateral bending deformation of the edge conveyor belt is minimized after being loaded. Therefore, improving the lateral rigidity of the edge conveyor belt is the key to reducing the lateral load-bearing deformation of the belt and increasing its load-bearing capacity.
The lateral rigidity value of the edge blocking conveyor belt body refers to the ratio of the bending weight of the belt body caused by the self weight of the edge blocking conveyor belt body to the width value of the belt body on both sides of the freely supported belt body in the transverse vertical section of the belt body.
The technical standard requirement for the lateral rigidity value of a high lateral rigidity edge conveyor belt is ≤ 0.05. After optimizing and improving the structure of the edge conveyor belt, the lateral rigidity detection value is 0.036 after adding a lateral rigidity reinforcement layer. The lateral deformation of the belt body is reduced after bearing, which can increase the bearing capacity by 15% – 20%.
An effective measure to improve the lateral rigidity of large heavy-duty conveyor belts is to set up a special composite adhesive layer made of polyester short fibers that have been specially mixed and rolled between the multi-layer tensile canvas layers of the flat base belt — that is, the polyester short fibers are embedded in the adhesive layer along the transverse direction of the belt in a single direction.
The use of this specialized composite adhesive layer that enhances the lateral bending resistance of the edge conveyor belt can increase the lateral rigidity value of the belt body by 2.5× compared to ordinary structured edge conveyor belts, with the lateral rigidity value improving from 0.09 to 0.036.
Frequently Asked Questions (FAQ)
Q1 What conveying angles can a wave shaped edge conveyor belt support?
Wave shaped edge conveyor belts can support conveying angles ranging from 30 to 90 degrees, making them suitable for steep incline and vertical conveying applications where standard flat belts are not effective.
Q2 What types of core materials are available for edge conveyor belts?
Edge conveyor belts are available with several core material options, including cotton canvas core (CC-56), nylon fabric cores (NN100–NN500), polyester fabric cores (EP100–EP500), and wire rope cores (ST1000–ST5400), allowing selection based on load requirements and application environment.
Q3 What types of materials can edge conveyor belts transport?
Edge conveyor belts are specially designed to convey a wide range of materials including powdery, granular, small-sized, pasty, and liquid materials that are prone to scattering during transport — making them highly versatile for bulk material handling industries.
Q4 How does the lateral rigidity reinforcement layer improve belt performance?
A specialized composite adhesive layer of polyester short fibers is embedded transversely between the multi-layer canvas layers of the base belt. This enhancement increases the lateral rigidity value of the belt by 2.5 times — from 0.09 to 0.036 — reducing lateral bending deformation under load and increasing bearing capacity by 15% to 20%.
Q5 What is the standard bandwidth range for wave shaped edge conveyor belts?
The standard bandwidth for wave shaped edge conveyor belts ranges from 100mm to 2400mm, with fabric layers from 2 to 10, making them available in a wide range of sizes to accommodate different conveying capacities and industrial requirements.
Q6 What are the key advantages of edge conveyor belts over traditional conveying systems?
Compared to traditional conveying systems, edge conveyor belts offer a smaller footprint, lower investment cost, higher lifting height, larger conveying capacity, smooth horizontal-to-incline transition, lower energy consumption, and a longer service life — making them a cost-effective solution for steep-angle bulk material handling.