+86 18920794106
0102030405
High Angle Wavy Edge Rubber Conveyor Belt - China Suppliers & Factory for Durable Material Handling Solutions
⚙
Specifications
Wave Shaped Edge Conveyor Belt (Ordinary Large Angle) — Key Specifications:
▶
Core Materials: CC-56, NN100, NN150, NN200, NN300, NN400
▶
Bandwidth: 100mm – 2400mm
▶
Fabric Layers: 2 – 10 layers
▶
Cover Adhesive: Working surface: 1.5–8mm | Non-working surface: 0–4.5mm
📄
Core Material of Edge Conveyor Belt
| Cotton Canvas Core | CC-56 |
| Nylon Fabric Core | NN100, NN150, NN200, NN300, NN400, NN500 |
| Polyester Fabric Core | EP100, EP150, EP200, EP300, EP400, EP500 |
| Wire Rope Core | ST1000 – ST5400 |
| Edge Height (mm) | S80, S100, S120, S160, S200, S240, S300, S400, S500 |
| Partition Height (mm) | TC75, TC90, TC110, TC140, TC180, TC220, TC280, TC380, TC480 |
📝 General Writing Style Example: B800 × 6 (3+3+1.5) × 110 meters | S120-120 TC110-252-460
✓
Product Features
- 1 Increased conveying angle ranging from 30 to 90 degrees, allowing steeper inclines.
- 2 Small footprint and low investment cost, making it ideal for space-limited environments.
- 3 Large conveying capacity with higher lifting height capability.
- 4 Smooth transition from horizontal to inclined or vertical conveyance.
- 5 Suitable for conveying powdery, granular, small, pasty, and liquid materials that are prone to scattering.
- 6 Low energy consumption, simple structure, high tape strength, and long service life.
🔍
Product Description
The load-bearing capacity of the edge conveyor belt is improved, and the lateral bending deformation of the edge conveyor belt is minimized after being loaded. Therefore, improving the lateral rigidity of the edge conveyor belt is the key to reducing the lateral load-bearing deformation of the belt and increasing its load-bearing capacity.
The lateral rigidity value of the edge blocking conveyor belt body refers to the ratio of the bending weight of the belt body caused by the self-weight of the edge blocking conveyor belt body to the width value of the belt body on both sides of the freely supported belt body in the transverse vertical section of the belt body.
The technical standard requirement for the lateral rigidity value of a high lateral rigidity edge conveyor belt is not greater than 0.05. After optimizing and improving the structure of the edge conveyor belt, the lateral rigidity detection value is 0.036 after adding a lateral rigidity reinforcement layer. The lateral deformation of the belt body is reduced after bearing, which can increase the bearing capacity by:
▲ 15% – 20% Bearing Capacity Increase
▲ Lateral Rigidity: 0.036 (Standard ≤ 0.05)
An effective measure to improve the lateral rigidity of large heavy-duty conveyor belts is to set up a special composite adhesive layer made of polyester short fibers that have been specially mixed and rolled between the multi-layer tensile canvas layers of the flat base belt. The polyester short fibers are embedded in the adhesive layer along the transverse direction of the belt in a single direction.
The use of this specialized composite adhesive layer that enhances the lateral bending resistance of the edge conveyor belt can increase the lateral rigidity value of the belt body by 2.5 times compared to ordinary structured edge conveyor belts — improving the lateral rigidity value from 0.09 to 0.036.
📈 2.5× Lateral Rigidity Improvement
📈 From 0.09 → 0.036
❓
Frequently Asked Questions
Q
What conveying angles can the wave shaped edge conveyor belt handle?
The wave shaped edge conveyor belt supports conveying angles from 30 to 90 degrees, making it highly versatile for steep incline or even vertical material transport applications.
Q
What types of core materials are available for the edge conveyor belt?
The belt is available with multiple core material options, including Cotton Canvas Core (CC-56), Nylon Fabric Cores (NN series), Polyester Fabric Cores (EP series), and Wire Rope Cores (ST1000–ST5400), catering to a wide range of industrial requirements.
Q
What types of materials can the edge conveyor belt transport?
It is suitable for transporting powdery, granular, small-sized, pasty, and liquid materials that are prone to scattering, including bulk materials like coal, sand, grain, and chemical powders.
Q
How does the lateral rigidity reinforcement layer improve belt performance?
By incorporating a specialized composite adhesive layer of transversely embedded polyester short fibers between the tensile canvas layers, the belt's lateral rigidity is increased by 2.5 times (from 0.09 to 0.036), reducing lateral deformation under load and improving bearing capacity by 15% to 20%.
Q
What are the standard bandwidth and layer options for this belt?
The edge conveyor belt is available in bandwidths ranging from 100mm to 2400mm, with fabric layers configurable from 2 to 10 layers, allowing customization to suit various load capacities and conveyor widths.
Q
How is the edge conveyor belt specification format written?
The general writing format follows this convention: B[bandwidth] × [layers] ([top cover + bottom cover + intermediate]) × [length in meters]. For example: B800 × 6 (3+3+1.5) × 110 meters, or using edge and partition notation such as S120-120 TC110-252-460.